Easy-to-apply thin film lubricants -
effective in stopping creaking from plastic parts
OVERVIEW
- Nonflammable lubricants produced by diluting a fluorinated grease with a fluorinated solvent.
- Form a thin, uniform semi-dry lubricating film following application to a friction surface as a result of the evaporation of the solvent.
- Allow dip coating of small parts, thanks to their excellent ability to penetrate into tiny recesses.
- Ready applicability to plastic and rubber parts and a long service life, made possible by excellent chemical stability.
- Ideal for use on electronic equipment, office equipment, home appliances, interior automobile parts and similar, to lubricate sliding parts and gears, and prevent joints from creaking/squeaking.
Directions
The solvent dries within 10 seconds of application, and creates a thin, even coating.
It can be applied simply with a brush or by dipping, so no special equipment is required.
1,Shake before use: Shake the can before use to evenly distribute the active ingredient throughout the liquid.(If it has been stored for a long period, shake the can upright, then turn it upside down and shake it again to mix it well.)
2,Mixing during use: To prevent the active ingredient from settling, mix the solution occasionally during use.
3,Preventing evaporation:
It is vital to prevent evaporation to control the concentration of the product and help you use an appropriate amount.
●When dividing the solution into smaller containers, use containers with a narrow opening* and keep the liquid level low.
●Use a simplified lid or similar as much as possible while using the product. * Avoid using shallow containers with a wide opening.
Prior to using a fluorinated grease, please take note of the following points:
- As fluorinated greases have a stable chemical structure, they are not compatible with other synthetic or mineral oils. If a fluorinate grease is applied to a surface on which any antirust agent, grease or the like has previously been applied, it is likely to be repelled from the surface, resulting in seizure.
- Although fluorinated greases are less toxic than general-purpose greases and non-flammable, they emit fluorine gas if heated to 260°C or more as a result of thermal decomposition of their ingredients. For this reason, be sure to use them within the specified temperature range.
- To remove old fluorinated grease, cleaning with a highly fluorinated organic solvent.
LINE UP
High-performance liquid greases with improved dispersion stability, etc. compared to the series shown to the left.
Sumitec Liquid HD-005
| Approximate Operating Temperature Range |
Description | NET, Packing Unit, Code |
|---|---|---|
| −65℃〜＋180℃ | High loads/high durability.Works well under various temperatures, from low to high temperatures. Particularly suitable for areas that require high durability at low temperatures. |
1kg×6(Code: 241670) |